S.E.R. FAQ
Home
Search
NotTaR of Television Sets : Picture is overloaded, washed out, or no..  
 Copyright © 1994-2007, Samuel M. Goldwasser. All Rights Reserved. Reproduction of this document in whole or in part is permitted if both of the following conditions are satisfied: 1. This notice is included in its entirety at the beginning. 2. There is no charge except to cover the costs of copying. I may be contacted via the Sci.Electronics.Repair FAQ (www.repairfaq.org) Email Links Page.

     << No reception from antenna.. |  Index  | Jumping picture on white .. >>

Picture is overloaded, washed out, or noisy

This indicates an Automatic Gain Control (AGC) problem often caused by a dried up capacitor. You will probably need a schematic to go much further. This could be a problem in the tuner, IF, or video amplifiers.

The following assumes you are sure the signal source is strong - try a VCR or other local one (channel 3/4, not the RCA jacks).

(From: Glenn Watkins (blueribb@mail.comcat.com).) Substitute a variable voltage source for the tuner's AGC voltage. Most of the time the range of AGC is from 1 to 7 volts. If you can get a decent snow free picture with an external AGC source, then the tuner is probably OK.