|
|
Printer and Photocopier Troubleshooting and Repair Collection : Okidata FAX machine - Printer Alarm 4
Copyright ©
1994-2007, Samuel M. Goldwasser. All Rights Reserved. Reproduction of this document in whole or in part is permitted if both of the following conditions are satisfied: 1. This notice is included in its entirety at the beginning. 2. There is no charge except to cover the costs of copying.
I may be contacted via the Sci.Electronics.Repair FAQ (www.repairfaq.org) Email Links Page.
|
<< HP plotter communications.. |
Index
| Packard Bell laser printe.. >>
|
"I am currently working on a Okidata fax machine Model Okifax 2100.
The display reads: PRINTER ALARM 4[TEL], CONFIRM AND 'STOP'
If anyone has seen this problem and would be kind enough to share the
fix it would be greatly appreciated."
(From: Darrin Acreman (darrina@profax.com.au).)
In all Oki plain paper machines, 'Printer Alarm 4' is caused by the fuser
section failing to reach the correct operating temperature. The most common
cause is a blown thermal fuse in the fuser section.