|
Printer and Photocopier Troubleshooting and Repair Collection : HP LaserJet II triac replacement
Copyright ©
1994-2007, Samuel M. Goldwasser. All Rights Reserved. Reproduction of this document in whole or in part is permitted if both of the following conditions are satisfied: 1. This notice is included in its entirety at the beginning. 2. There is no charge except to cover the costs of copying.
I may be contacted via the Sci.Electronics.Repair FAQ (www.repairfaq.org) Email Links Page.
|
<< HP LaserJet II fuser over.. |
Index
| HP LaserJet Series II int.. >>
|
(From: John (jneff@uidaho.edu).)
We have been replacing these with a SK10466 (800 V, 8 A, Vgt 2 V, Igt 50 mA).
(From: dhickey@knox.edu).
If it is in the AC Powersupply, try a NTE 56006.
Also check for 2 open resistors.